Faxing 409FILE LOCATION: C:\Users\fxstdpc-admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section20.fmD E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY3 Enter the speed dial number between 001 and 200 using the numeric keypad,and then press the (Set) button.The corresponding entry's name briefly displays. To confirm the name again,press the (Set) button.4 Adjust the document resolution to suit your fax needs. (For details, see"Adjusting the Document Resolution." For adjusting the contrast, see"Adjusting the Document Contrast.")5 Press the (Start) button.The document scans into the memory.When the document is loaded on the document glass, the display promptsyou for another page. Press or button to select Yes to add moredocuments or to select No to begin sending the fax immediately, and thenpress the (Set) button.The fax number stored in the speed dial location is automatically dialed. Thedocument is sent when the remote fax machine answers.NOTE: Using the asterisk (*) in the first digit, you can send a document tomultiple locations. For example, if you enter 00*, you can send a document tothe locations registered between 001 and 009.Group DialingIf you frequently send the same document to several destinations, you can createa group of these destinations and set them under a one-digit group dial location.This enables you to use a group dial number setting to send the same documentto all the destinations in the group.NOTE: You cannot include one group dial number within another group dialnumber.Setting Group Dial1 Press the (Menu) button.2 Press button until System Setup is highlighted, and then press the(Set) button.3 Press button until Admin Menu is highlighted, and then press the(Set) button.
