Dell DR4000 Administrator's Manual

Also see for DR4000 Restore Manager: Owner's manual Glossary Administrator's guide Reference guide Release notes

Contents

Configuring the DR4000 System Settings 35FILE LOCATION: C:\Users\bruce_wylie\Documents\~DellDocs\~FINAL_DR4000_1.0.1.1_DOCS\~Final_1.0.1.1_DR4000_Admin_Guide_Files\~3-D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 4 / 5 / 1 2 - F O R P R O O F O N LYNetworking Page: Ethernet Port ValuesThe Networking page displays the currently configured multiple Ethernetports for the 1-GbE (or 10-GbE/10-GbE SFP+) NICs that are bondedtogether into a single interface:• In a 1-GbE NIC configuration, the two LAN on Motherboard (LOM)ports, and the two ports on the NIC card itself, are bonded together toconstitute the four ports.• In 10-GbE or 10-GbE SFP+NIC configurations, only the two ports onthe 10-GbE and 10-GbE SFP+ NIC are bonded together.The ports for the bonded NICs display the MAC address, the port speed inmegabtyes/second, a maximum speed, and the duplex setting.The following example shows Ethernet port values for the Ethernet ports in a1-GbE NIC bonded configuration:• Eth0:– MAC address: 00:30:59:9A:00:96– Speed (1000Mb/s)– Max Speed (1000baseT/Full)– Duplex (Full)• Eth1:– MAC address: 00:30:59:9A:00:97– Speed (1000Mb/s)– Max Speed (1000baseT/Full)– Duplex (Full)• Eth2:– MAC address: 00:30:59:9A:00:98– Speed (1000Mb/s)– Max Speed (1000baseT/Full)– Duplex (Full)