Dell Dimension 2350 User Manual

Also see for 2350 - Wireless WLAN Broadband Router: Installation instructions Owner's manual Setup guide Installation guide Specifications

Contents

5. Disconnect your computer and all attached devices from their electrical outlets, and then press the power button to ground the system board.6. Remove the computer cover.7. Locate the battery socket on the system board and pry the battery out of its socket with your fingers or with a plastic screwdriver.8. Insert the battery into the socket with the side labeled "+" facing up.9. Replace the computer cover.10. Connect your computer and devices to electrical outlets, and turn them on.11. Access the system setup program and restore the settings you recorded in step 1.Replacing the Computer Cover1. Ensure that all cables are connected, and fold cables out of the way. Make sure cables are not routed over the drive cage—they will prevent the coverfrom closing properly.2. Ensure that no tools or extra parts are left inside the computer.3. Place the computer cover on the computer.4. Slide the computer cover towards the front of the computer until it fits completely into place.5. Tighten the thumbscrew.6. Connect your computer and devices to electrical outlets, and then turn them on.Back to Contents PageCAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of thecomputer. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components.NOTICE: To avoid damage to the system board while you pry the battery loose, be sure to insert the plastic screwdriver between the battery and thesocket (not the system board).NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.