Dell Dimension 3000 Owner's Manual

Also see for Latitude 3000 Series: Installation instructions Service manual Setup and specifications Manual Service manual

Contents

Dell Dimension 3000 Owner's Manual Manual pdf 84 page image

84 AppendixPower ManagementAC Recovery Determines what happens when AC power is restored to the computer.Auto Power On Sets the computer to automatically turn on. Choices are every day orweekdays (every Monday through Friday).The default setting is Off.This feature does not work if you turn off your computer using a power stripor surge protector.Auto Power Time Sets time to automatically turn on the computer.Time is kept in a 24-hour format (hours:minutes). Change the start-up timeby pressing the right- or left-arrow key to increase or decrease the numbers,or type numbers in both the date and time fields.This feature does not work if you turn off your computer using a power stripor surge protector.Low Power Mode When Low Power Mode is selected, remote wakeup events no longer powerup from Hibernate or Off.Remote Wake Up This option allows the computer to power up when a NIC or RemoteWakeup-capable modem receives a wake up signal.On is the default setting. On w/ Boot to NIC allows the computer toattempt to boot from a network prior to using the boot sequence.NOTE: Normally, the computer can be powered up remotely from suspendmode, hibernate mode, or when powered off. When Low Power Mode (in thePower Management menu) is enabled, the computer can only be powered upremotely from Suspend.Suspend Mode The options are S1, a suspend state where the computer is running in a low-power mode, and S3, a standby state where the power is reduced or turnedoff for most components, however, system memory remains active.MaintenanceCMOS Defaults This setting restores the computer’s factory-installed default settings.Event Log Displays the system event log.BIOS Update After downloading a new version of the BIOS, use this option to identifyand define the location of the BIOS update file. The options are Diskette orDisk.POST BehaviorFastboot When set to On (default), your computer starts more quickly because itskips certain configurations and tests.