Dell Dimension 4500 Manual

Also see for Dimension 4500: Owner's manual Owner's manual

Contents

Dell Dimension 4500 Manual Manual pdf 46 page image

Diskette Configuration SubmenuEvent Log Configuration SubmenuOption FunctionDrive Installed Displays the primary IDE device type.Type Specifies the type of hard drive. Settings for this option are User, Auto, CD-ROM, ATAPI Removable, Other ATAPI, IDE Removable, andNone.MaximumCapacityDisplays the maximum capacity of the primary IDE device.LBA Mode Displays whether LBA mode control is enabled or not on the primary IDE device.Block Mode Displays the multi-sector transfer setting of the primary IDE device.PIO Mode Displays the PIO mode setting of the primary IDE device.Ultra DMA Displays the ultra DMA setting of the primary IDE device.Cable Detected Displays the type of cable connected to the primary IDE device.Option FunctionDiskette Controller Configures the floppy drive interface. Options are Enabled (default) and Disabled.Floppy A Selects the floppy drive type from Not Installed, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3 1/2", 1.44/1.25 MB 3 1/2", or 2.88 MB 31/2".Diskette WriteProtectProtects a floppy disk from being written to when set to Enabled. When this option is set to Disabled (default), the floppy disk is notprotected unless the write-protect tab is in place.