Setting Up and Using Your Computer 21To use the Media Card Reader:1 Check the media or card to determine the proper orientation for insertion.2 Slide the media or card into the appropriate slot until it is completely seated in the connector.If you encounter resistance, do not force the media or card. Check the card orientation and try again.Connecting Two MonitorsCAUTION: Before you begin any of the procedures in this section, follow the safety instructions in theProduct Information Guide.NOTICE: If you are connecting two monitors that have VGA connectors, you must have the optional DVI adapter.If you are connecting two flat-panel monitors, at least one of them must have a VGA connector. If you areconnecting a TV, you may connect only one monitor (VGA or DVI) in addition to the TV.If you purchased a graphics card that supports dual monitors, follow these instructions to connect andenable your monitors. The instructions tell you how to connect either two monitors (each with a VGAconnector), one monitor with a VGA connector and one monitor with a DVI connector, or a TV.xD-Picture Cardand SmartMedia (SMC)Memory Stick (MS/MS Pro)SecureDigital Card (SD)/MultiMediaCard (MMC)CompactFlash Type Iand II (CF I/II) andMicroDrive CardWD846bk2.book Page 21 Thursday, September 14, 2006 2:40 PM
