Dell EMC PowerEdge R640 WNW58 Installation And Service Manual

iDRAC Quick Sync 2 indicator codesiDRAC Quick Sync 2 module (optional) is located on the left control panel of your system.iDRAC Quick Sync 2 indicatorsTable 7. iDRAC Quick Sync 2 indicators and descriptionsiDRAC Quick Sync 2 indicatorcode Condition Corrective actionOff (default state) Indicates that the iDRAC Quick Sync 2feature is turned off. Press the iDRACQuick Sync 2 button to turn on theiDRAC Quick Sync 2 feature.If the LED fails to turn on, reseat the leftcontrol panel flex cable and check. If the problempersists, see the Getting help section.Solid white Indicates that iDRAC Quick Sync 2 isready to communicate. Press the iDRACQuick Sync 2 button to turn off.If the LED fails to turn off, restart the system.If the problem persists, see the Getting helpsection.Blinks white rapidly Indicates data transfer activity. If the indicator continues to blink indefinitely, seethe Getting help section.Blinks white slowly Indicates that firmware update is inprogress. If the indicator continues to blink indefinitely, seethe Getting help section.Blinks white five times rapidlyand then turns offIndicates that the iDRAC Quick Sync 2feature is disabled.Check if iDRAC Quick Sync 2 feature isconfigured to be disabled by iDRAC. Ifthe problem persists, see the Getting helpsection. www.dell.com/poweredgemanuals or DellOpenManage Server Administrator User’s Guideat https://www.dell.com/openmanagemanuals.Solid amber Indicates that the system is in fail-safemode.Restart the system. If the problem persists, seethe Getting help section.Blinking amber Indicates that the iDRAC Quick Sync 2hardware is not responding properly.Restart the system. If the problem persists, seethe Getting help section.Right control panel viewFigure 6. Right control panelDell EMC PowerEdge R640 overview 15