Indicator StatusAmber blinkingrapidlyError or fault with portFibre channelport speedindicatorIndicator StatusOff 2 Gb link establishedGreen on 4 Gb link establishedAmber on 8 Gb link establishedModule statusindicator Indicator StatusOff Module is off or enclosure power is offGreen on All ports are ready for useAmber on Module is booting, being reset, or ports are offlineGreen/amberblinkingDiagnostic message is in error log, or environmental range isexceededModule powerindicator Indicator StatusOff Power to the module is offGreen Module has powerStatus/identificationindicatorIndicator StatusBlue on Normal healthBlue off Boot in progressBlue blinking Identifying moduleAmber blinking Fault condition in moduleI/O Modules—Pass-ThroughDell 4 Gbps Fibre Channel Pass-Through ModuleThe 4 Gbps fibre channel pass-through module provides a bypass connection between a fibre channel mezzanine cardin the blade and optical transceivers for direct connection into a fibre channel switch or a storage array. The 16 pass-through ports on this module can negotiate speeds of 1 Gbps, 2 Gbps, or 4 Gbps. The 4 Gbps fibre channel pass-throughmodule is hot-swappable, and may be installed in Fabric B or Fabric C.NOTE: To ensure proper functionality, use only the Short Wave SFP transceivers provided with this module.64
