Removing An I/O ModuleCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.1. If you have not already installed the cable enumerators to make removal and replacement of the I/O modules easierand faster, install them now.For more information, see theRack Installation Guide at support.dell.com/manuals.2. Disconnect the cables attached to the I/O module.3. Lift the latch on the end of the module’s handle and rotate the handle away from the module.4. Slide the I/O module out of the enclosure.5. Install the I/O connector cover.Figure 47. Removing and Installing an I/O Module1. I/O connector cover2. I/O module3. release latch4. handleInstalling An I/O ModuleCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.85
