Option DescriptioniDRAC Select DHCP or Static IP to configure the network mode. If Static IP is selected, the available fields are IP,Subnet (Sub), and Gateway (Gtw). Select Setup DNS to enable DNS and to view domain addresses. Twoseparate DNS entries are available.Set error Select SEL to display LCD error messages in a format that matches the IPMI description in the SEL. This isuseful when trying to match an LCD message with an SEL entry.Select Simple to display LCD error messages in a simplified user-friendly description. See System ErrorMessages for a list of messages in this format.Set home Select the default information to be displayed on the LCD Home screen. See View Menu to see the optionsand option items that can be set as the default on the Home screen.View MenuNOTE: When you select an option in the View menu, you must confirm the option before proceeding to the nextaction.Option DescriptioniDRAC IP Displays the IPv4 or IPv6 addresses for the iDRAC7. Addresses include DNS (Primary and Secondary),Gateway, IP, and Subnet (IPv6 does not have Subnet).MAC Displays the MAC addresses for iDRAC, iSCSI, or Network devices.Name Displays the name of the Host, Model, or User String for the systemNumber Displays the Asset tag or the Service tag for the system.Power Displays the power output of the system in BTU/hr or Watts. The display format can be configured in theSet home submenu of the Setup menu.Temperature Displays the temperature of the system in Celsius or Fahrenheit. The display format can be configured inthe Set home submenu of the Setup menu.Diagnostic IndicatorsThe diagnostic indicators on the system front panel display error status during system startup.NOTE: No diagnostic indicators are lit when the system is switched off. To start the system, plug it into a workingpower source and press the power button.The following section describes system conditions and possible corrective actions associated with these indicators:Health indicatorCondition Corrective ActionIf the system is on, and in good health, the indicatorlights solid blue.None required.The indicator blinks amber if the system is on or instandby, and any error exists (for example, a failedfan or hard drive)See the System Event Log or system messages for thespecific issue.14
