Figure 51. Removing and Installing the Control Panel—Eight Hard Drive System1. control panel2. notches (4)3. LCD connector cable4. screw5. locking tabs (4)Installing The Control PanelCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.1. If applicable, insert the control panel cable through the slot on the chassis.CAUTION: To avoid damaging the power LED, do not use excessive force.2. Align the locking tabs on the control panel with the notches on the chassis and angle the control panel until itsnaps into place.When properly seated, the control panel will be flush with the front panel.89
