Dell G16 7630 Owner's Manual

Also see for G16 7630: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

Steps1. Align and place the touchpad into the slot on the palm-rest and keyboard assembly.2. Replace the four (M2x2) screws that secure the touchpad to the palm-rest and keyboard assembly.3. Connect the touchpad cable to the system board and close the latch.4. Align and place the touchpad bracket into the slot on the palm-rest and keyboard assembly.5. Replace the three (M2x2) screws that secure the touchpad bracket to the palm-rest and keyboard assembly.Next steps1. Install the battery.2. Install the base cover.3. Follow the procedure in After working inside your computer.Display assemblyRemoving the display assemblyPrerequisites1. Follow the procedure in Before working inside your computer.2. Remove the base cover.3. Remove the rear cover.About this taskThe following images indicate the location of the display assembly and provide a visual representation of the removal procedure.Removing and installing Field Replaceable Units (FRUs) 55