4. Turn the computer over.5. Connect the display cable to the connector on the system board and close the latch.6. Adhere the tape that secures the display-cable connector latch to the system board.7. Connect the Dynamic Display Switch (DDS) to the system board.Next steps1. Install the rear cover.2. Install the base cover.3. Follow the procedure in After working inside your computer.Keyboard-controller boardRemoving the keyboard-controller boardPrerequisites1. Follow the procedure in Before working inside your computer.2. Remove the base cover.3. Remove the battery.About this taskThe following image(s) indicate the location of the keyboard-controller board and provides a visual representation of theremoval procedure.Removing and installing Field Replaceable Units (FRUs) 59

Dell G16 7630 Owner's Manual