Dell Inspiron 1320 Service Manual

Also see for Inspiron 1320: User guide Setup & features Product safety data sheet Setup guide

Back to Contents PageCamera BoardDell™ Inspiron™ 1320 Service ManualRemoving the Camera BoardReplacing the Camera BoardRemoving the Camera Board1. Follow the instructions in Before You Begin.2. Remove the battery (see Removing the Battery).3. Remove the center control cover (see Removing the Center Control Cover).4. Remove the keyboard (see Removing the Keyboard).5. Remove the hard drive (see Removing the Hard Drive).6. Remove the palm rest (see Removing the Palm Rest).7. Remove the display assembly (see Removing the Display Assembly).8. Remove the display bezel (see Removing the Display Bezel).9. Disconnect the camera cable from the connector on the camera board.10. Remove the screw that secures the camera board to the display cover.11. Remove the camera board off the display cover.Replacing the Camera Board1. Align the camera board over the screw hole.WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety bestpractices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metalsurface (such as a connector on your computer).CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™is not covered by your warranty.CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside thecomputer.1 camera board 2 screw3 camera cable connector