5. Using the display cable pull tab disconnect the display cable from the display board.6. Lift the display panel off the display cover.Replacing the Display Panel1. Connect the display panel cable to the connector on the display board and secure it with the conductive tape.2. Align the display panel with the display cover and replace the six screws that secure the display panel to the display cover.3. Replace the display bezel (see Replacing the Display Bezel).4. Replace the display assembly (see Replacing the Display Assembly).Display Panel BracketRemoving the Display Panel Bracket1. Remove the display assembly (see Removing the Display Assembly).2. Remove the display bezel (see Removing the Display Bezel).3. Remove the display panel (see Removing the Display Panel).4. Remove the six screws (three on each side) that secure the display panel brackets to the display panel.5. Remove the display panel brackets off the display panel.Replacing the Display Panel Bracket1. Replace the display panel brackets.2. Replace the six screws (three on each side) that secure the display panel brackets to the display panel.3. Replace the display panel (see Replacing the Display Panel).4. Replace the display bezel (see Replacing the Display Bezel).5. Replace the display assembly (see Replacing the Display Assembly).Back to Contents Page1 screws (6) 2 display panel brackets (2)