Dell Inspiron 14 5440 Owner's Manual

Figure 79. Removing the display panelSteps1. Place the display back-cover and antenna assembly on a clean and flat surface.2. Remove the six screws (M2.5x2.5) that secure the display panel to the display back-cover and antenna assembly.3. Holding the display hinge, gently bend the bottom corner of the display back-cover and antenna assembly to release theright and left display hinges.4. Holding the display hinges, slightly lift and slide the display panel down to release it from the catches on the top of thedisplay back-cover and antenna assembly.5. Gently flip the display panel assembly forward, peel back the tape that secures the display cable to the connector on the rearof the display panel.NOTE: Ensure that the panel has a clean and smooth surface to rest on, to prevent damage.6. Disconnect the display cable from the connector on the display panel and remove the display panel.NOTE: The display panel is assembled with the display brackets and display hinges as a single service part. DO NOT pullthe two pieces of elastic tape and separate the brackets from the panel.110 Removing and installing Field Replaceable Units (FRUs)