Dell Inspiron 14 5440 Owner's Manual

Figure 49. Installing the power adapter portSteps1. Place the power-adapter port in its slot on the palm-rest and keyboard assembly.2. Connect the power-adapter cable to the connector (DC IN1) on the system board.3. Adhere the tape that secures the power-adapter cable to the system board.4. Replace the two screws (M2.5x4) that secure the right hinge to the palm-rest and keyboard assembly.Next steps1. Install the base cover for computers shipped with a plastic chassis.2. Follow the procedure in After working inside your computer.Removing the power-adapter port for computers shipped with analuminum chassisCAUTION: The information in this removal section is intended for authorized service technicians only.Prerequisites1. Follow the procedure in Before working inside your computer.NOTE: Ensure that your computer is in Service Mode. For more information see, Before working inside your computer.2. Remove the base cover for computers shipped with an aluminum chassis.About this taskCAUTION: Removing the battery resets the BIOS setup settings to default. It is recommended that you note theBIOS setup settings before removing the battery.76 Removing and installing Field Replaceable Units (FRUs)