9. Ease the keyboard up until it clears off the palm rest.10. Without pulling hard on the keyboard, hold it towards the display.11. Lift the connector latch that secures the keyboard cable to the connector on the system board and remove the keyboard cable.12. Lift the keyboard off the computer.Replacing the Keyboard1. Follow the instructions in Before You Begin.2. Slide the keyboard cable into the connector on the system board. Press down on the connector latch to secure the keyboard cable to the connector onthe system board.3. Slide the tabs on the keyboard into the slots on the palm rest.4. Gently press around the edges of the keyboard and slide it upwards to secure the keyboard under the tabs on the palm rest.5. Close the display and turn the computer over.6. Replace the two screws that secure the keyboard to the computer base.7. Replace the memory module(s) (see Replacing the Memory Module(s)).8. Replace the module cover (see Replacing the Module Cover).1 plastic scribe 2 keyboardCAUTION: Be extremely careful when removing and handling the keyboard. Failure to do so could result in scratching the display panel.1 keyboard tabs(5)2 keyboard cableconnector