Dell Inspiron 1410 Service Manual

Also see for Inspiron 1410: User guide Setup guide

Removing the Display Inverter1. Remove the display assembly (see Display).2. Remove the display bezel (see Removing the Display Bezel).3. Disconnect the cables from the connectors on either side of the inverter board.4. Lift out the inverter board from the securing plastic tabs.Replacing the Display Inverter1. Align the holes on the inverter board with the tabs on the display cover and snap it into position.2. Connect the cables on either side of the inverter board.3. Replace the display bezel (see Replacing the Display Bezel).4. Replace the display assembly (see Display).Back to Contents Page1 inverter board 2 connector (2)CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety bestpractices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.