16 | Removing the Memory Module(s)Removing the Memory Module(s)WARNING: Before working inside your computer, read the safety informationthat shipped with your computer and follow the steps in "Before You Begin" onpage 7. After working inside your computer, follow the instructions in"After Working Inside Your Computer" on page 9. For more safety best practices,see the Regulatory Compliance home page at dell.com/regulatory_compliance.Prerequisites1 Remove the computer cover. See "Removing the Computer Cover" on page 12.2 Remove the fan shroud. See "Removing the Fan Shroud" on page 14.Procedure1 Locate the memory-module connector on the system board. See "System-BoardComponents" on page 11.2 Press out the securing clip at each end of the memory-module connector.3 Grasp the memory module and pull it upward.NOTE: If the memory module is difficult to remove, hold and gently pull itupward from one end and then on the other end until the memory module isdisengaged from the connector.1 securing clips (2) 2 memory module3 memory-module connector231
