22 | Replacing the Wireless Mini-CardReplacing the Wireless Mini-CardWARNING: Before working inside your computer, read the safety informationthat shipped with your computer and follow the steps in "Before You Begin" onpage 7. After working inside your computer, follow the instructions in "AfterWorking Inside Your Computer" on page 9. For additional safety best practicesinformation, see the Regulatory Compliance Homepage atdell.com/regulatory_compliance.ProcedureCAUTION: To avoid damage to the wireless mini-card, do not place any cablesunder it.1 Locate the wireless mini-card slot. See "System-Board Components" on page 11.2 Align the notch on the wireless mini-card with the tab on the mini-card connector.3 Slide the wireless mini-card at an angle into the system-board connector.4 Press the other end of the wireless mini-card down and replace the screw thatsecures the wireless mini-card to the system board.5 Connect the antenna cables to the wireless mini-card.The following table provides the antenna-cable color scheme for the wirelessmini-card supported by your computer.Postrequisites1 Replace the fan shroud. See "Replacing the Fan Shroud" on page 15.2 Replace the computer cover. See "Replacing the Computer Cover" on page 13.Connectors on thewireless cardAntenna-cable colorMain (white triangle) WhiteAuxiliary (black triangle) Black