Dell Inspiron 3647 Owner's Manual

Contents

Dell Inspiron 3647 Owner's Manual Manual pdf 35 page image

Replacing the Front I/O Panel | 35Replacing the Front I/O PanelWARNING: Before working inside your computer, read the safety informationthat shipped with your computer and follow the steps in "Before You Begin" onpage 7. After working inside your computer, follow the instructions in "AfterWorking Inside Your Computer" on page 9. For additional safety best practicesinformation, see the Regulatory Compliance Homepage atdell.com/regulatory_compliance.Procedure1 Insert the front I/O panel clamps into the slots on the front panel.2 Slide the front I/O panel toward the side. Ensure that the screw hole on thefront I/O panel aligns with the screw hole on the front panel.3 Replace the screw that secures the front I/O panel to the front panel.4 Route the front I/O panel cables through the routing guides on the chassis.5 Connect the front I/O panel cables to the system-board connectors (USBF1, USBF2,and AUDF1 ). See "System-Board Components" on page 11.Postrequisites1 Replace the graphic card, if applicable. See "Removing the Graphics Card" onpage 19.2 Replace the drive cage. See "Replacing the Drive Cage" on page 28.3 Replace the front bezel. See "Replacing the Front Bezel" on page 25.4 Replace the fan shroud. See "Replacing the Fan Shroud" on page 15.5 Replace the computer cover. See "Replacing the Computer Cover" on page 13.