3-10 Dell Inspiron 5000 Reference and Troubleshooting GuideConfiguring the Television Control Panel Setting1. Click the Start button and select Settings —> Control Panel.2. In the Control Panel window, click the Display icon.3. In the Display Properties window, click the Settings tab.4. Click the Advanced button.5. In the Multiple Monitors window, click the Displays tab.6. In the TV section, click the Primary button.7. Click OK.The Display Properties window appears.8. Click OK.9. Close the Control Panel window.NOTE: The DVD-ROM drive displays a DVD movie on the Primary display. To view theDVD on the television screen, set the TV display to Primary.Setting and Changing the DVD-ROM Drive Region CodeIf you reinstall the DVD decoder software, you must set the DVD-ROM drive regioncode before you can play a movie. The region code can be reset if you relocate toanother region.NOTICE: You should reset the region code only when absolutely necessary.You can reset the region code up to four times.To reset the drive region code, perform the following steps:1. Insert a DVD coded for the new region into the DVD-ROM drive.A notification box appears, explaining that the disc belongs to another region andcannot be played. The notification also explains how to reset the region setting.2. Follow the instructions on the screen to change the region setting.Install the Intel ® SpeedStep™ Utility (Windows 98)(Optional)NOTICE: Do not install the Intel SpeedStep utility unless your computer hasa Mobile Intel Pentium® III processor with SpeedStep technology. To deter-mine if your computer has a Mobile Intel Pentium III processor withSpeedStep technology, check for the Intel SpeedStep item in the Powermenu of the system setup program. For instructions on using the systemsetup program, refer to Appendix B, “Using the System Setup Program.”3959ubk1.book Page 10 Monday, March 20, 2000 4:52 PM
