Front Stand: Dell Inspiron One 2305/2310 Service Manualfile:///T|/htdocs/systems/InsOne2310/sr/sm/front_st.htm[7/25/2012 10:24:43 AM]Back to Contents PageFront StandDell™ Inspiron™ One 2305/2310 Service ManualRemoving the Front StandReplacing the Front StandWARNING: Before working inside your computer, read the safety information that shipped with yourcomputer. For additional safety best practices information, see the Regulatory Compliance Homepage atwww.dell.com/regulatory_compliance.CAUTION: Only a certified service technician should perform repairs on your computer. Damage due toservicing that is not authorized by Dell™ is not covered by your warranty.CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or byperiodically touching an unpainted metal surface (such as a connector on your computer).Removing the Front Stand1. Follow the instructions in Before You Begin.2. Remove the back cover (see Removing the Back Cover).3. Remove the four screws that secure the front-stand assembly to the computer.4. Lift the rear stand so that the front stand is accessible.5. Lift the front-stand assembly away from the computer.1 rear stand 2 screws (4)3 front-stand assembly6. Remove the two screws that secure the I/O bracket to the front stand.7. Release the five tabs that secure the I/O bracket to the front stand.8. Remove the I/O bracket from the front stand.