Dell Inspiron One 2305 Service Manual

Also see for Inspiron One 2305: Setup guide Service manual Service manual

Contents

System-Board Shield: Dell Inspiron One 2305/2310 Service Manualfile:///T|/htdocs/systems/InsOne2310/sr/sm/sb_shiel.htm[7/25/2012 10:24:50 AM]10. Follow the instructions from step 5 to step 7 in Removing the Infrared (IR) Blaster Connector.Replacing the System-Board Shield1. Follow the instructions in Before You Begin.2. Follow the instructions from step 2 to step 5 in Replacing the Infrared (IR) Blaster Connector.3. Follow the instructions from step 2 to step 3 in Replacing the Antenna-In Connector.4. Route the antenna-in connector cable and infrared (IR) blaster connector cable through the routing guides on thesystem-board shield.5. Connect the IR blaster connector cable to the connector (CIR Emitter) on the system board.6. Connect the antenna-in connector cable to the connector on the TV tuner card.7. Carefully turn the system-board shield over and align the screw holes on the system-board shield with the screw holeson the chassis.8. Replace the four screws that secure the system-board shield to the chassis.9. Follow the instructions from step 4 to step 5 in Replacing the Front Stand.10. Replace the back cover (see Replacing the Back Cover).CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remaininside the computer. Failure to do so may result in damage to the computer.11. Connect your computer and all attached devices to electrical outlets, and turn them on.Back to Contents Page