Dell Inspiron One 2305 Service Manual

Also see for Inspiron One 2305: Setup guide Service manual Service manual

Contents

MXM Assembly (Optional): Dell Inspiron One 2305/2310 Service Manualfile:///T|/htdocs/systems/InsOne2310/sr/sm/mxm_heat.htm[7/25/2012 10:24:57 AM]Back to Contents PageMXM Assembly (Optional)Dell™ Inspiron™ One 2305/2310 Service ManualRemoving the MXM AssemblyReplacing the MXM AssemblyWARNING: Before working inside your computer, read the safety information that shipped with yourcomputer. For additional safety best practices information, see the Regulatory Compliance Homepage atwww.dell.com/regulatory_compliance.WARNING: The MXM assembly may be very hot during normal operation. Ensure that it has had sufficienttime to cool before you touch it.CAUTION: Only a certified service technician should perform repairs on your computer. Damage due toservicing that is not authorized by Dell™ is not covered by your warranty.CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or byperiodically touching an unpainted metal surface (such as a connector on your computer).Removing the MXM Assembly1. Follow the instructions in Before You Begin.2. Remove the back cover (see Removing the Back Cover).3. Follow the instructions from step 2 to step 5 in Removing the Front Stand.4. Remove the system-board shield (see Removing the System-Board Shield).5. Remove the MXM-assembly fan (see Removing the MXM-Assembly Fan).6. Remove the three screws that secure the MXM-assembly to the chassis.7. Remove the MXM assembly from the MXM-assembly connector.NOTE: The appearance of the system board may vary based on your computer model.1 MXM assembly connector 2 MXM assembly