Dell Inspiron One 2310 Intel Service Manual

Also see for Inspiron One 2305: Setup guide Service manual Service manual

Replacing the Mini-Card(s)1. Follow the instructions in Before You Begin.2. Align the notch on the Mini-Card with the tab in the system-board connector.3. Insert the Mini-Card at a 45-degree angle into the system-board connector.4. Press the other end of the Mini-Card down and replace the two screws that secure the Mini-Card to the system-board connector.5. Connect the appropriate antenna cable(s) to the Mini-Card you are installing. The following table provides the antenna cable color scheme for the Mini-Card(s) supported by your computer.6. Replace the system-board shield (see Replacing the System-Board Shield).7. Follow the instructions from step 4 to step 5 in Replacing the Front Stand.8. Replace the back cover (see Replacing the Back Cover).9. Connect your computer and all attached devices to electrical outlets, and turn them on.Back to Contents PageCAUTION: The connectors are keyed to ensure correct insertion. Use of excessive force may damage the connectors.CAUTION: To avoid damage to the Mini-Card, ensure that there are no cables or antenna cables under the Mini-Card.Connectors on the Mini-Card Antenna Cable Color SchemeWLAN (2 antenna cables)Main WLAN (white triangle)Auxiliary WLAN (black triangle)whiteblackTV tuner (1 antenna cable) blackCAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so mayresult in damage to the computer.