Dell Inspiron One 2310 Intel Service Manual

Also see for Inspiron One 2305: Setup guide Service manual Service manual

Back to Contents PageRear StandDell™ Inspiron™ One 2305/2310 Service ManualRemoving the Rear StandReplacing the Rear StandRemoving the Rear Stand1. Follow the instructions in Before You Begin.2. Remove the back cover (see Removing the Back Cover).3. Follow the instructions from step 2 to step 5 in Removing the Front Stand.4. Remove the rear stand cover (see Removing the Rear Stand Cover).5. Lift the rear stand and remove the two screws at the bottom of the rear stand hinge.6. Remove the three screws at the top of the rear stand hinge.7. Slide the tab on the rear stand hinge out of the slot on the chassis and then lift the rear stand away from the computer.Replacing the Rear Stand1. Follow the instructions in Before You Begin.2. Slide the tab on the rear stand hinge into the slot on the chassis.3. Replace the three screws at the top of the rear stand hinge.4. Lift the rear stand and replace the two screws at the bottom of the rear stand hinge.5. Replace the rear stand cover (see Replacing the Rear Stand Cover).6. Follow the instructions from step 4 to step 5 in Replacing the Front Stand.WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety bestpractices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™is not covered by your warranty.CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metalsurface (such as a connector on your computer).1 tab 2 rear stand hinge3 screws (5) 4 rear stand