Setting Up a Home and Office Network1. Connect the network cable to the network adapter connector on the back of your computer or docking device.2. Connect the other end of the network cable to a network connection device, such as a network wall connector.Network Setup WizardThe Microsoft® Windows® XP operating system provides a Network Setup Wizard to guide you through the process of sharing files, printers, or an Internetconnection between computers in a home or small office.1. Click the Start button, point to All Programs® Accessories® Communications, and then click Network Setup Wizard.2. On the welcome screen, click Next.3. Click Checklist for creating a network.4. Complete the checklist and required preparations.5. Return to the Network Setup Wizard and follow the instructions on the screen.Internet Connection FirewallThe Internet Connection Firewall provides basic protection from unauthorized access to the computer while the computer is connected to the Internet. Thefirewall is automatically enabled when you run the Network Setup Wizard. When the firewall is enabled for a network connection, the firewall icon appearswith a red background in the Network Connections section of the Control Panel.Note that enabling the Internet Connection Firewall does not reduce the need for virus-checking software.For more information, see the Help and Support Center.Back to Contents PageNOTE: Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure.NOTE: Do not use a network cable with a telephone wall connector.NOTE: Selecting the connection method labeled "This computer connects directly to the Internet" enables the integrated firewall provided withWindows XP Service Pack 1 (SP1) or later.