Option DescriptionKeyboardIlluminationThis field lets you choose the operating mode of the keyboard illumination feature. The keyboard brightnesslevel can be set from 0% to 100%. The options are:• Disabled• Dim• Bright (enabled by default)Keyboard Backlightwith ACThe Keyboard Backlight with AC option does not affect the main keyboard illumination feature. KeyboardIllumination will continue to support the various illumination levels. This field has an effect when thebacklight is enabled.Keyboard BacklightTimeout with ACThe Keyboard Backlight Timeout dims out with AC option. The main keyboard illumination feature is notaffected. Keyboard Illumination will continue to support the various illumination levels. This field has aneffect when the backlight is enabled.Keyboard BacklightTimeout on BatteryThe Keyboard Backlight Timeout dims out with Battery option. The main keyboard illumination feature is notaffected. Keyboard Illumination will continue to support the various illumination levels. This field has aneffect when the backlight is enabled.Unobtrusive Mode This option, when enabled, pressing Fn+F7 turns off all light and sound emissions in the system. To resumenormal operation, press Fn+F7 again. This option is disabled by default.MiscellaneousDevicesAllows you to enable or disable the following devices:• Enable Camera —enabled by default• SD Card Read Only —enabled by default• Enable Media Card• Disable Media CardVideo screen optionsOption DescriptionLCD Brightness Allows you to set the display brightness depending up on the power source (On Battery and On AC).NOTE: The video setting will be visible only when a video card is installed into the system.Security screen optionsOption DescriptionAdmin Password Allows you to set, change, or delete the administrator (admin) password.NOTE: You must set the admin password before you set the system or hard drive password.Deleting the admin password automatically deletes the system password and the hard drivepassword.NOTE: Successful password changes take effect immediately.Default setting: Not setSystem Password Allows you to set, change or delete the system password.NOTE: Successful password changes take effect immediately.43