Option DescriptionDefault Setting: Enable MEBx HotkeyFastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:• Minimal• Thorough (default)• AutoExtended BIOSPOST TimeAllows you to create an additional preboot delay. The options are:• 0 seconds. This option is enabled by default.• 5 seconds• 10 secondsVirtualization support screen optionsOption DescriptionVirtualization Allows you to enable or disable the Intel Virtualization Technology.Enable Intel Virtualization Technology (default).VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilitiesprovided by Intel® Virtualization technology for direct I/O.Enable VT for Direct I/O - enabled by default.Trusted Execution This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additionalhardware capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization Technology,and Virtualization technology for direct I/O must be enabled to use this feature.Trusted Execution - disabled by default.Wireless screen optionsOption DescriptionWireless Switch Allows to set the wireless devices that can be controlled by the wireless switch. The options are:• WWAN• GPS (on WWAN Module)• WLAN/WiGig• BluetoothAll the options are enabled by default.NOTE: For WLAN and WiGig enable or disable controls are tied together and they cannot beenabled or disabled independently.Wireless DeviceEnableAllows you to enable or disable the internal wireless devices.• WWAN/GPS50