Dell Latitude E7270 Owner's Manual

Also see for Latitude E7270: How-to guide Owner's manual

Contents

Dell Latitude E7270 Owner's Manual Manual pdf 49 page image

Option DescriptionPrimary BatteryChargeConfigurationAllows you to select the charging mode for the battery. The options are:• Adaptive• Standard — Fully charges your battery at a standard rate.• ExpressCharge — The battery charges over a shorter period of time using Dell’s fast chargingtechnology. This option is enabled by default.• Primarily AC use• CustomIf Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.NOTE: All charging mode may not be available for all the batteries. To enable this option, disablethe Advanced Battery Charge Configuration option.POST Behavior screen optionsOption DescriptionAdapter Warnings Allows you to enable or disable the system setup (BIOS) warning messages when you use certain poweradapters.Default setting: Enable Adapter WarningsKeypad(Embedded)Allows you to choose one of two methods to enable the keypad that is embedded in the internal keyboard.• Fn Key Only: This option is enabled by default.• By NumlockNOTE: When setup is running, this option has no effect. Setup works in Fn Key Only mode.Mouse/Touchpad Allows you to define how the system handles mouse and touch pad input. The options are:• Serial Mouse• PS2 Mouse• Touchpad/PS-2 Mouse: This option is enabled by default.Numlock Enable Allows you to enable the Numlock option when the computer boots.Enable Network. This option is enabled by default.Fn Key Emulation Allows you to set the option where the Scroll Lock key is used to simulate the Fn key feature.Enable Fn Key Emulation (default)Fn Lock Options Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between theirstandard and secondary functions. If you disable this option, you cannot toggle dynamically the primarybehavior of these keys. The available options are:• Fn Lock. This option is selected by default.• Lock Mode Disable/Standard• Lock Mode Enable/SecondaryMEBx Hotkey Allows you to specify whether the MEBx Hotkey function should enable, during the system boot.49