Dell M5200 Owner's Manual

Also see for 5200n Mono Laser Printer: User guide

Contents

Set up for net work pri nti ng 197 Choose the port that corresponds to the hardware port you used when you connectedthe printer to the print server (or other computer). For example, USB001 representsthe USB port on the print server.8 Click Finish.The Congratulations screen appears.9 Click Print a Test Page to verify the driver is installed correctly.10 Click Finish.If you are sitting at the print server and want to install printer drivers on one clientcomputer, you can go to that client computer, insert the Drivers and Utilities CD, andfollow the steps on the screen, or you can install the drivers remotely (see“Install printerdrivers on one or more remote client computers” on page 22).Install printer drivers on one client computerIf you are connecting one client computer to the print server, go to that client computer andinsert the Drivers and Utilities CD.1 Click Install the printer on the Network (Network installation), and then click Next.2 Click On this client computer.3 Click Next.4 Select the software or documentation you want your users to have access to.5 Select the printer protocols you want to install, and then click Next.6 Select the Universal Network Connection (UNC) port.7 Type the name of the print server the printer is connected to as well as the name of theprinter:\\Server Name\PrinterShareName.To find out the print server name, right-click your mouse and choose My Computer →Properties → Network Identification.8 Click Finish.The Congratulations screen appears.9 Click Print a Test Page to verify the driver is installed correctly.10 Click Finish.