Dell N1108T-ON Getting Started Manual

Also see for N1108P-ON: Getting started guide

Getting Started Guide 23Step 2:Now we need to set up your initial privilege (Level15) user account. This account is used to login to theCLI and Web interface. You may set up other accountsand change privilege levels later. For moreinformation on setting up user accounts and changingprivilege levels, see the user documentation.To set up a user account:Please enter the user name. [root]:adminPlease enter the user password: ********Please reenter the user password: ********Step 3:Next, an IP address is set up on the VLAN 1 routinginterface.You can use the IP address to access the CLI, Webinterface, or SNMP interface of the switch.To access the switch through any Management Interfaceyou can. Set up the IP address for the Management Interface.. Set up the default gateway if IP address ismanually configured on the routing interface.Step 4:Would you like to set up the VLAN1 routing interfacenow? [Y/N] yPlease enter the IP address of the device (A.B.C.D) orenter “DHCP” (without the quotes) to automaticallyrequest an IP address from the network DHCP server:10.1.1.200Please enter the IP subnet mask (A.B.C.D or /nn):255.255.255.0Step 5: