Dell N2128PX-ON Getting Started Manual

Also see for N2128PX-ON: Upgrading Firmware Upgrading Software and Firmware

Guia de Noções Básicas 145Step 2:Now we need to set up your initial privilege (Level15) user account. This account is used to login to theCLI and Web interface. You may set up other accountsand change privilege levels later. For moreinformation on setting up user accounts and changingprivilege levels, see the user documentation.To set up a user account:Please enter the user name. [root]:adminPlease enter the user password: ********Please reenter the user password: ********Step 3:Next, IP addresses are set up on the OOB (Out-Of-Band)Interface and/or the VLAN 1 routing interface.You can use these IP addresses to access the CLI, Webinterface, or SNMP interface of the switch.To access the switch through any Management Interfaceyou can. Set up the IP address for the Management Interface.. Set up the default gateway if IP address ismanually configured on both routing and OOB interface.Would you like to set up the Out-Of-Band interfacenow? [Y/N] yPlease enter the IP address of the device (A.B.C.D) orenter “DHCP” (without the quotes) to automaticallyrequest an IP address from the network DHCP server.[DHCP]: dhcpStep 4:Would you like to set up the VLAN1 routing interfacenow? [Y/N] y