1224 Managing IPv4 and IPv6 MulticastConfiguring and Viewing IGMP ProxyBeginning in Privileged EXEC mode, use the following commands toconfigure the upstream VLAN routing interface as an IGMP proxy. TheIGMP proxy issues host messages on behalf of the hosts that have beendiscovered on IGMP-enabled interfaces. The upstream interface is theinterface closest to the root multicast router, which should be running IGMP.NOTE: Configure only the upstream interface as the IGMP proxy. IGMP shouldbe enabled on all downstream interfaces. IP routing and IP multicast must beenabled on the switch for the IGMP proxy feature to operate.Command Purposeconfigure Enter global configuration mode.interface vlanvlan-id Enter Interface Configuration mode for thespecified VLAN.ip igmp-proxy Configure the interface as an IGMP proxyinterface.ip igmp-proxy reset-status (Optional) Reset the host interface statusparameters of the IGMP Proxy.ip igmp-proxy unsolicit-rprt-intervalsecondsConfigure the unsolicited report interval for theIGMP proxy interface.The range forseconds is 0–260 seconds.CTRL + Z Exit to Privileged EXEC mode.show ip igmp-proxy View a summary of the host interface statusparameters.show ip igmp-proxy interface View a detailed list of the host interface statusparameters. This command displays informationonly when IGMP Proxy is operational.show ip igmp-proxy groups View a table of information about multicastgroups that IGMP Proxy reported. Thiscommand displays information only when IGMPProxy is operational.
