268 Managing General System SettingsConfiguring the BannerBeginning in Privileged EXEC mode, use the following commands toconfigure the MOTD, login, or User EXEC banner. The switch supports thefollowing banner messages:• MOTD—Displays when a user connects to the switch.• Login—Displays after the MOTD banner and before the login prompt.• Exec—Displays immediately after the user logs on to the switch.Command Purposeconfigure Enter Global Configuration mode.banner{motd|login|exec}textConfigure the banner message that displays when youconnect to the switch (motd and login) or enter UserEXEC mode (exec).Use quotation marks around a message if it includesspaces.line{telnet|ssh|console}Enter the terminal line configuration mode for Telnet,SSH, or the console.motd-banner Specify that the configured MOTD banner displays. Toprevent the banner from displaying, enter no motd-banner.exec-banner Specify that the configured exec banner displays. Toprevent the banner from displaying, enter no exec-banner.login-banner Specify that the configured login banner displays. Toprevent the banner from displaying, enter no login-banner.CTRL + Z Exit to Privileged EXEC mode.show banner Display the banner status on all line terminals.
