Dell OptiPlex 7050 Micro Owner's Manual

Also see for OptiPlex 3050: Owner's manual Quick start guide Quick start guide

Contents

Dell OptiPlex 7050 Micro Owner's Manual Manual pdf 20 page image

Installing system board1 Hold the system board by its edges and angle it toward the back of the computer.2 Lower the system board into the computer until the connectors at the back of the system board align with the slots on the chassis,and the screw holes on the system board align with the standoffs on the computer.3 Tighten the #6-32*5.4 screws to secure the system board to the computer.4 Place the metal tab on the system board and tighten the screw to secure the metal tab to the system board.5 Install the:a processorb heat sinkc system fand 2.5–inch drive assemblye cover6 Follow the procedure in After working inside your computer.20 Removing and installing components