Dell OptiPlex 9010 AIO Owner's Manual

Also see for OptiPlex 9010 AIO: Setup and features information

Contents

Table 9. WirelessOption DescriptionWireless Switch This option determines which wireless device can be controlled by the WirelessSwitch.• WWAN• WLAN• Bluetooth(R)Wireless Device Enable This option allows enabling/disabling of internal wireless devices.• WWAN• WLAN• Bluetooth(R)Table 10. MaintenanceOption DescriptionService Tag Displays the service tag of your computer.Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This optionis not set by default.SERR Messages Controls the SERR message mechanism. Some graphics cards require that the SERRmessage mechanism be disabled.• Enable SERR Messages (selected by default)Table 11. Image ServerOption DescriptionLookup Method Specifies how the ImageServer looks up the server address.• Static IP• DNS (selected by default)NOTE: This field is only relevant when theIntegrated NIC control in theSystemConfiguration group is set toEnabled with ImageServer.ImageServer IP Displays the primary static IP address of the ImageServer with which the clientsoftware communicates. The default IP address is 255.255.255.255.NOTE: This field is only relevant when theIntegrated NIC control in theSystemConfiguration group is set toEnabled with ImageServer and whenLookup Methodis set toStatic IP.ImageServer Port Allows you to specify the primary IP port of the ImageServer, which is used by theclient to communicate. The default IP port is 06910.NOTE: This field is only relevant when theIntegrated NIC control in theSystemConfiguration group is set toEnabled with ImageServer.45