40 Using the System Setup ProgramIntegrated Devices ScreenTable 2-4 lists the options and descriptions for the information fields that appear on the IntegratedDevices screen.Table 2-4. Integrated Devices Screen OptionsOption DescriptionIntegrated SAS Controller(Enabled default)Enables or disables the integrated SAS controller. This option appears only if a SAScontroller is installed.Integrated RAIDController(Enabled default)Enables or disables the integrated RAID controller. This option appears only if aSAS RAID controller is installed.Embedded SATA(Off default)Allows the integrated SATA controller to be set to Off or ATA Mode.IDE CD-ROM Controller(Auto default)Enables the integrated IDE controller. When set to Auto, each channel of theintegrated IDE controller is enabled if IDE devices are attached to the channel.Diskette Controller(Auto default)Enables or disables the system's diskette drive controller. When Auto is selected,the system turns off the controller when necessary to accommodate a controllercard installed in an expansion slot. You can also configure the drive as Read-Only,or Off. When using the Read-Only setting, the drive cannot be used to write to adisk.User Accessible USB Ports(All Ports On default)Enables or disables the system’s user accessible USB ports. Options are All PortsOn, Only Back Ports On, and All Ports Off.Embedded Gb NIC1(Enabled with PXEdefault)Enables or disables the system's integrated NIC1. Options are Enabled withoutPXE, Enabled with PXE, and Disabled. PXE support allows the system to bootfrom the network. Changes take effect after the system reboots.MAC Address Displays the MAC address for the integrated 10/100/1000 NIC. This field does nothave user-selectable settings.TOE Capability Displays the TCP/IP Offload Engine (TOE) feature status of NIC1.Embedded Gb NIC2(Enabled without PXEdefault)Enables or disables the system's integrated NIC2. Options are Enabled withoutPXE, Enabled with PXE, and Disabled. PXE support allows the system to bootfrom the network. Changes take effect after the system reboots.MAC Address Displays the MAC address for the integrated 10/100/1000 NIC. This field does nothave user-selectable settings.TOE Capability Displays the TOE feature status of NIC2.
