Using the System Setup Program 41Serial Communication ScreenTable 2-5 lists the options and descriptions for the information fields that appear on the SerialCommunication screen.System Security ScreenTable 2-6 lists the options and descriptions for the information fields that appear on the System Securityscreen.Table 2-5. Serial Communication Screen OptionsOption DescriptionSerial Communication(Off default)Options are On with Console Redirection via COM2, and Off.Failsafe Baud Rate(57600 default)Displays the failsafe baud rate used for console redirection whenthe baud rate cannot be negotiated automatically with the remoteterminal. This rate should not be adjusted.Remote Terminal Type(VT 100/VT 220 default)Select either VT 100/VT 220 or ANSI.Redirection After Boot(Enabled default)Enables or disables BIOS console redirection after your systemboots to the operating system.Table 2-6. System Security Screen OptionsOption DescriptionSystem Password Displays the current status of your system's password security feature and allowsyou to assign and verify a new system password.NOTE: See "Using the System Password" on page 43 for instructions on assigning asystem password and using or changing an existing system password.Setup Password Restricts access to the System Setup program in the same way that you restrictaccess to your system using the system password feature.NOTE: See "Using the Setup Password" on page 45 for instructions on assigning asetup password and using or changing an existing setup password.