104 Troubleshooting Your SystemTroubleshooting the MouseProblem• System message indicates a problem with the mouse.• Mouse is not functioning properly.Action1 Run the appropriate online diagnostic test. See "Using Server Administrator Diagnostics" on page 121.If the test fails, continue to the next step.2 Examine the mouse and its cable for signs of damage.If the mouse is not damaged, go to step 4.If the mouse is damaged, continue to the next step.3 Swap the faulty mouse with a working mouse.If the problem is resolved, replace the faulty mouse. See "Getting Help" on page 131.4 Enter the System Setup program and ensure that the USB port is enabled. See "Using the SystemSetup Program" on page 33.If the problem is not resolved, see "Getting Help" on page 131.Troubleshooting Basic I/O FunctionsProblem• Error message indicates a problem with a serial port.• Device connected to a serial port is not operating properly.Action1 Enter the System Setup program and ensure that the serial port is enabled and configured correctly foryour application. See "Using the System Setup Program" on page 33.2 If the problem is confined to a particular application, see the application documentation for specificport configuration requirements that the program may require.3 Run the appropriate online diagnostic test. See "Using Server Administrator Diagnostics" on page 121.If the tests run successfully but the problem persists, see "Troubleshooting a Serial I/O Device" onpage 105.
