Installing System Components 6510 Exit the System Setup program and reboot the system.11 Partition and logically format the drive.See the documentation that came with the drive for instructions oninstalling any software required for drive operation.Expansion-Card StabilizerRemoving the Expansion-Card StabilizerCAUTION: Many repairs may only be done by a certified service technician. Youshould only perform troubleshooting and simple repairs as authorized in yourproduct documentation, or as directed by the online or telephone service andsupport team. Damage due to servicing that is not authorized by Dell is not coveredby your warranty. Read and follow the safety instructions that came with theproduct.1 Turn off the system and attached peripherals. Disconnect the system fromthe electrical outlet and peripherals.2 Open the system. See "Opening the System" on page 45.3 Press the release tab and lift the expansion card stabilizer out of slots in thechassis. See Figure 3-15.Installing the Expansion-Card StabilizerCAUTION: Many repairs may only be done by a certified service technician. Youshould only perform troubleshooting and simple repairs as authorized in yourproduct documentation, or as directed by the online or telephone service andsupport team. Damage due to servicing that is not authorized by Dell is not coveredby your warranty. Read and follow the safety instructions that came with theproduct.1 Slide the edge of the expansion-card stabilizer into the slots in the coolingshroud and chassis until the release tab locks into place. See Figure 3-15.2 Close the system. See "Closing the System" on page 46.
