Dell POWEREDGE R610 Technical Manualbook

Also see for PowerEdge R610: Hardware owner's manual Manual Installation Update Installation instructions

Contents

Dell POWEREDGE R610 Technical Manualbook Manual pdf 10 page image

Dell™ PowerEdge™ R610 Technical Guidebook10G. side views and featuresRack installation components such as rails are provided with the PowerEdge R610 Rack Kit. The rackinstallation components are as follows: sliding rack mount with latest generation Cable ManagementArm (CMA). The PowerEdge R610 will feature slam latches to offer easier removal from the rack. Whenthe system is installed in a rack, please observe the following guideline:When the system is installed in a rack, only Dell-approved CMAs should be installed behind the chassis.Rails• Enable the replacement of thumbscrews with slam latches on the chassis for easier stowing inthe rack.• Include the new, simple, and intuitive ReadyRail™ tool-less rack interface for square-hole andround-hole racks.• Provide significantly improved compatibility with non-Dell racks.• Static rails for the R610 & R710 fit in all types of four-post and two-post racks available in theindustry including four-post threaded hole racks.CMAs• Provide much larger vent pattern for improved airflow through the CMA.• Include a common support tray for eliminating CMA sag.• Replaced tie wraps with hook and loop straps to eliminate risk of cable damage during cycling.• Maintain key feature of being fully reversible with no conversion required.h. Rails and cable management