216 Configuration: Premium Feature— Remote ReplicationTo remove remote replication from a storage array:1 In the AMW of the storage array containing the primary virtual disk, selectthe Logical tab.2 In the Logical pane, right-click the primary virtual disk of a replicated pair,then select Remove Replication Relationship.The Remove Replication Relationship dialog is displayed. The Replicatedpairs table shows all replicated pairs in both the local and remote storage array.3 To remove a replication relationship, select one or more replicated pairs.To select all replicated pairs, click Select All.4 Click Remove.The Remove Replication Relationship - Confirmation message is displayed.5 Click Yes.The Remove Replicated Pair - Progress bar shows the progress of theremoval process.Deactivating the Remote Replication on the Storage ArrayBefore you can permanently disable the Remote Replication premium featureyou must deactivate it on the storage array, see "Disabling the RemoteReplication Premium Feature" on page 217. Deactivating the RemoteReplication premium feature on this storage array does not affect remotevirtual disk replications or the Remote Replication premium features on otherstorage arrays. However, another storage array cannot use this storage array asa remote storage array for creating a separate remote virtual disk replication.To deactivate remote replication in a storage array:1 In the Array Management Window, select Storage ArrayRemoteReplicationDeactivate.The Deactivate Remote Replication confirmation message is displayed.2 Click Yes.The Remote Replication premium feature is deactivated and the tworeplication repository virtual disks are deleted from the storage array.
