Troubleshooting: Your Storage Array Software 283c Specify that the free capacity to be matched is less than, equal to, orgreater than the capacity entered in the GB box.d Go to step 8.8 Click Find Next.To see every node that matches the criteria, click Find Next repeatedly. Ifno matches are found, the Search Failed dialog is displayed. Click OK, andre-enter the search criteria.9 To close the dialog, click Cancel.To continue searching for nodes with the same criteria after the Finddialog is closed, press .Using Go ToUse the Go To option to quickly jump to an associated snapshot repositoryvirtual disk, snapshot virtual disk, source virtual disk, or target virtual disk.These virtual disks are displayed in the Logical pane of the Logical tab.The Go To option is available only if the Snapshot premium feature or theVirtual Disk Copy premium feature is enabled or if snapshot virtual disks orvirtual disk copies currently exist on the storage array. The Go To option is notaccessible from the Mappings tab of the Array Management Window.1 On the Logical tab of the AMW, select one of these virtual disks, and go tothe indicated step:• Snapshot virtual disk—Go to step 2.• Snapshot repository virtual disk—Go to step 3.• Source virtual disk—Go to step 4.• Target virtual disk—Go to step 5.2 Select View Go To Snapshot Virtual Disk.The selection jumps to the associated snapshot virtual disk in theLogical pane.3 Select View Go To Snapshot Repository Virtual Disk.The selection jumps to the associated snapshot repository virtual disk inthe Logical pane.
