78 Configuration: About Your Storage ArrayChanging Expansion Enclosure ID NumbersWhen an MD1200 series expansion enclosure is connected to an MD3600iSeries storage array for the first time, an enclosure ID number is assigned andmaintained by the expansion enclosure. This enclosure ID number is alsoshown in the MDSM and can be changed if required.To change the enclosure ID numbers:1 In the AMW, select the storage array, and select Storage ArrayChange Enclosure ID.2 Select a new enclosure ID number from the Change Enclosure ID list.The enclosure ID must be between 0 and 99 (inclusive).3 To save the changed enclosure ID, click Change.Changing the Enclosure Order in the Physical PaneYou can change the order of the RAID controller modules and the expansionenclosures in the Physical pane to match the hardware configuration in yourstorage array. The Physical pane that initially is displayed is a default viewthat may not match your storage array. The enclosure order change remains ineffect until it is modified again.To change the enclosure order in the Physical pane:1 In the AMW, select Storage Array Change Enclosure Order.2 From the enclosures list, select the enclosure you want to move and clickeither Up or Down to move the enclosure to the new position.3 Click OK.If you have set a password for the selected storage array, the EnterPassword dialog is displayed.4 Type the current password for the storage array.5 Click OK.
