Rack Mount Configuration 2214Rack Mount ConfigurationYour PowerEdge C8000 server enclosure can be mounted in a four-post rackcabinet.Installation GuidelinesUse the following safety guidelines to help ensure your own personal safetyand to help protect your system and working environment from potentialdamage. See additional safety information included with your system.WARNING: Whenever you need to lift the system, get others to assist you. Toavoid injury, do not attempt to lift the system by yourself.WARNING: The system is not fixed to the rack or mounted on the rails. To avoidpersonal injury or damage to the system, you must adequately support the systemduring installation and removal.WARNING: To avoid a potential electrical shock hazard, a third wire safetygrounding conductor is necessary for the rack installation. The rack equipmentmust provide sufficient airflow to the system to maintain proper cooling.CAUTION: Before you install the server enclosure into a rack, it is recommendedthat you remove all installed sled modules from the enclosure to reduce weightand avoid injury.CAUTION: To prevent possible damage to the server enclosure surface and sledmodules, always place the server enclosure and sled modules on an antistatic mator antistatic foam.• Prepare an antistatic mat or antistatic foam to set the PowerEdge C8000server enclosure on during the compute or storage sled removal process.• Ensure that proper airflow is provided to components in the rack.
