Dell PowerConnect J-SRX100SU Getting Started Manual

Also see for PowerConnect J-SRX100S: Quick start

Contents

Dell PowerConnect J-SRX100SU Getting Started Manual Manual pdf 10 page image

10 Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started GuideAfter you connect the management device to the servicesgateway, the DHCP server process on the services gatewayautomatically assigns an IP address to the management device.Ensure that the management device acquires an IP address inthe range of 192.168.1.2 through 192.168.1.254 from the servicesgateway.NOTE: For the services gateway to assign an IP addressto the management device, the management devicemust be set up to connect using DHCP.If an IP address is not assigned to the managementdevice, you can manually configure an IP address inthe range of 192.168.1.2/24 through 192.168.1.99/24.Ensure you do not use 192.168.1.1, as this IP address isconfigured on the services gateway.2.2.3 Connecting to Your Internet Service ProviderConnect the fe-0/0/0 port on the Dell PowerConnect J-SeriesJ-SRX100S/SU Services Gateway to your ISP or Internet (see“Figure 1: Connecting the Management Device to the ServicesGateway”). The DHCP server that resides in your ISP networkprovides the necessary settings (such as default route, DNS, andso on) to the services gateway to connect to the Internet.NOTE: If you are using a static IP address to connect tothe provider’s network, do not perform “2 3 VerifyingInternet Connectivity ” To access the Internet from yourmanagement device (workstation or laptop), you needto first configure the static IP address on the fe-0/0/0interface and configure a default route.2 3 Verifying Internet ConnectivityWith a default configuration of the Dell PowerConnect J-SeriesJ-SRX100S/SU Services Gateway, you can access the Internetwhen you connect the management device into any one ofthe Ethernet ports (fe-0/0/1 through fe-0/0/7) and your ISP isconnected to the fe-0/0/0 port. For more information on defaultconfiguration, see “2 4 Understanding the Default ConfigurationSettings.”Now you can browse the Internet from your managementdevice. For example, type www dell com in your browser.NOTE: If you are using DHCP to verify the networksettings from your service provider, verify your Internetconnectivity. If you are using a static IP address toconnect to the provider’s network, do not verify theinternet connectivity.