Dell PowerConnect J-SRX100SU Getting Started Manual

Also see for PowerConnect J-SRX100S: Quick start

Contents

Dell PowerConnect J-SRX100SU Getting Started Manual Manual pdf 17 page image

Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide 174 Click Add in Nexthop and enter the default gateway IPaddress provided by your ISP.5 Click OK.2.7.6 Applying the Basic Configuration SettingsWhen you edit a configuration, you work in a copy of the currentconfiguration to create a candidate configuration. The changesyou make to the candidate configuration are visible throughthe user interface immediately, but do not take effect on thedevice until you commit the changes. When you commit theconfiguration, the candidate file is checked for proper syntax,activated, and marked as the current, operational softwareconfiguration file.To save the configuration, select Commit Options on the topright corner of the page and click Commit.NOTE: You can commit your configuration settings at theend of each task or you can commit all the configurationsettings at one time.2 8 Verifying the ConfigurationTo verify the basic configuration, access any external website (forexample, www dell com), to ensure that you are connected tothe Internet.If you are unable to connect to Internet from your managementPC, verify the following:1 In the J-Web interface, click the Troubleshoot tab and thenclick Ping Host.2 Enter www dell com in Remote Host and click Start. If yourping is successful go to Step 3, otherwise go to Step 4.3 Ensure the Management PC has acquired IP address (in therange 192.168.1.2 through 192.168.1.99) and DNS settingsfrom the services gateway. If the PC acquired the correct IPaddress/DNS and you are still not able to access internet, goto Step 5.